LED Controllor

Led Controllor

Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync The mosaic source is composed of two sources (2K×1K@60Hz) accessed to the OPT 1 Work with software to support brightness and chroma calibration on each LED, effectively removing color discrepancies and greatly improving LED display brightness and chroma consistency, allowing for better image quality Up to 4 units cascaded for image mosaic

Ürün Kodu :
Ürün Kategorisi :	Led Controllers

Processing Performance
Brightness Control1-100 Levels
Frame Frequency25HZ-60HZ
Grey Level256
Display Color1 Billion
Processing Depth8bit
Image ScalingSupport

Product Model
Product ModelDS-D42V06-N

Chassis
Chassis Height1.12U
Chassis Width351.2mm

Product Type
Product TypeLED Controller

LED Controller Power
Average Consumption≤28W
Number Of Power Interfaces1
Power Interface Specifications100-240V~，1.6A，50/60Hz

General
Working Temperature-10°C ～ 45°C
Storage Humidity10% ～ 95%
Working Humidity20% ～ 90%
Storage Temperature-20°C ～ 70°C
Packaging Size (W × H × D)565.0mm×175.0mm×450.0mm
Net Weight4kg
Gross Weight6.8kg
Dimensions (W × H × D)483.6mm×351.2mm×50.1mm
Packing ListDS-D42V06-N*1,Power Cable *4,Ethernet Cable *1,HDMI Cable *1,HDMI TO DVI Cable *1,USB Cable*1

Audio Input
Audio Input Interface(S)1
Audio Input Interface TypeHDMI inline

Video Input
Video Input Interface(S)4
Video Input Interface Type2 HDMI1.3+1 3G-SDI+1 DVI
Max. Input Resolution1080P
Video Input Resolution
HDMI1.3 interface
Supports 1920 x 1200@60Hz Video source input.
Supports HDCP1.4. Not supporting interlaced signal input.
Support custom resolution.
Custom maximum width: 3840 (3840 x) 648@60Hz ）
Custom maximum height: 2784 (800 x 2784@60Hz ）
Support front-end device push input: 600 x 3840@60Hz
HDMI 1.3-1 supports LOOP loop output.
SDI interface
Supports ST-424 (3G), ST-292 (HD), and ST-259 (SD) standard video source inputs.
Single channel support 1920 x 1080@60Hz Video source input.
Support de interlacing processing.
Input resolution and bit depth settings are not supported.
Supports 3G-SDI Loop output.
DVI interface
Supports 1920 x 1200@60Hz Video source input.
Supports HDCP1.4.
Interlaced signal input is not supported.
Support custom resolution.
Custom maximum width: 3840 (3840 x) 648@60Hz ）
Custom maximum height: 2784 (800 x 2784@60Hz ）
Support front-end device push input: 600 x 3840@60Hz
DVI supports LOOP loop output.
Video Input Processing Characteristics
Processing depth 8
Sampling format
RGB:444
YUV:4:4:4
YUV:422

Video Output
Max. Output Resolution3.9 Million
Loading Capacity For Video Output To LED
Single port with load 650000
Width 380~10240
Height 476~8192
LED Loading Interfaces6
LED Loading Interface TypeRJ45
Number Of Video Ring Pass Output Interfaces2
Video Looping Output Interface TypeHDMI 1.3+DVI
Video Looping Output Resolution1920×1200@60Hz

Audio Output
Audio Output Interface(S)NA
Audio Output Interface TypeNA

Front Panel
ScreenLCD screen
Key
"knob": Select menus, adjust parameters, and confirm operations.
"ESC"": Exit the menu or cancel the operation.
"MAIN/PIP 1/PIP 2"": Layer on, off, and layer state display.
"SCALE"": Full screen auto zoom shortcut key, adaptively fills the window with the lowest priority to full screen.
"PRESET"": Enter the scene settings menu.
"TEST"": Enter the test screen settings menu.
"FREEZE"": Freeze the output screen.
"FN"": Customizable function shortcut key.
"HDMI1/HDMI2/DVI/SDI"" Input source status display, supporting one click switching of the main window input source."
Pilot Lamp
"MAIN/PIP 1/PIP 2": Long blue light: The layer is turned on.
Blue flashing: The layer is currently being edited.
Long white light: The layer is not turned on.
"SCALE"":Long blue light: Full screen automatic scaling is enabled.
Long white light: Full screen auto zoom is not enabled.
"HDMI1/HDMI2/DVI/SDI"": Long blue light: There is an input source connected.
Blue flashing: No input source connected, already used by the layer.
Long white light: No input source connected or input source abnormal.

Control Interface
Control Network Port
"1 RJ45, 10M/100M/1000M adaptive Ethernet ports
Connect and control the computer or router."
3D InterfaceNA
IR InputNA
Serial Interface1, 1 debug serial port (RJ45)
Light PerceptionLIGHT SENSOR：Connect the optical probe to obtain ambient brightness, which can achieve automatic adjustment of screen brightness.
USB2 x USB 2.0
On-OffSwitch

Ürün Formunuz Başarıyla İletilmiştir

Ürünler

Led Controllor